Absolute System ASDA-B3 Note: To avoid data loss, replace the battery when any of the following circumstances occurs: 10 1. The servo drive shows AL061 which means the voltage is too low. Refer to Chapter 12 for more information. 2. Use P0.002 (monitoring variable 26h) to check the battery power. When it displays 31, it means the voltage is below 3.1V. Important When the voltage is below 2.7V, the motor’s position record may be lost if the drive operates under battery power, so you need to re-establish the absolute origin coordinates after installing a new battery.
Thus, it is suggested that you replace the battery when the main power to the servo drive is on to avoid loss of absolute position data. 10-12