ASDA-B3 Absolute System 10.3.3 PUU number The PUU number is a 32-bit absolute value with a positive or negative sign. When the motor is running in the forward direction, the PUU number increases; when it is running in the reverse 10 direction, the PUU number decreases. The forward direction does not mean the motor is running clockwise; the direction is defined by P1.001.Z. The range of the cycle number is -32768 to +32767. AL062 occurs when the number of cycles overflows. If the PUU number exceeds the range -2147483648 to +2147483647, the position counter overflows and AL289 occurs. Establish the absolute origin coordinates to clear AL062 or AL289.
You can determine whether or not to show AL062 and AL289 when the position overflows with P2.070. When reaching the maximum PUU number in the forward direction, the value changes from 2147483647 to -2147483648, and then increases from -2147483648 to 2147483647. The value changes the other way when the motor operates in the reverse direction. See the following examples: Example 1: When P1.044 = 16777216 and P1.045 = 100000, the motor needs 100,000 PUU to run a cycle. 2147483647 ч 100000 ≒ 21474.8, so once the motor runs over 21,474.8 ( Example 2: When P1.044 = 16777216 and P1.045 = 10000, the motor needs 10,000 PUU to run a cycle.
2147483647 ч 10000 ≒ 214748.3, so once the motor runs over 32,767 ( PUU 2147483647 0 -2147483648 Overflow warning Figure 10.3.3.1 Absolute position for PUU number Note: after establishing the absolute origin coordinates, any change to P1.001.Z or E-Gear ratio (P1.044 and P1.045) changes the original setting of the absolute origin coordinates. If the above parameters are changed, re-establish the absolute origin coordinates. 10-15 Overflow cycle value ...... ...... 2147483647 -2147483648 to 2147483647 -2147483648 ...... ...... Reverse direction w g AL289 Origin Forward direction AL289