Delta Electronics — 11.2.2.6 NMT services

CANopen Mode ASDA-B3 11.2.2.6 NMT services  State machine 11 The NMT state machine is shown as follows. After the servo drive completes the Initialization state, it enters the Pre-operational state. The NMT state machine determines the behavior of the communication function, such as PDO functions only in the Operational state. Power On or Hardware Reset (1) Initialization (2) (14) Pre-operational (11) (7) (4) (5) (10) (13) Stopped (3) (6) (8) (12) Operational (9) The following table shows the communication objects that can be used for each communication state:

11-14 State Description Initialization The servo drive successfully completes initialization after being powered on without errors occurring. The packet could still not be transmitted in this state. Pre-operational Data can be exchanged with SDO. If an alarm occurs in the servo drive, an emergency message is sent to notify the controller. Stopped SDO and TxPDO data packets can be used to exchange data with the controller. Operational This state allows for all data exchanges including SDO and PDO (TxPDO and RxPDO). Communication object Initialization Pre-operational Operational Stopped PDO V SDO V V Synchronization object V V Emergency object V V Boot-up object V NMT object V V V