ASDA-B3 Wiring 3.1 System connection 3.1.1 Connecting to peripheral devices (connecting to Delta communication type servo motor) 3 Power 100 W - 1.5 kW Single- / Three-phase 200 - 230V 2 kW - 3 kW Three-phase 200 - 230V No fuse breaker (NFB) It could prevent the instantaneous excessive current caused by short-circuit or from damaging the servo drive when power is on / off. Magnetic contactor (MC) When an alarm occurs, it outputs ALARM signal and cuts off the power to the servo drive. Mini USB connector (CN4) Connect to PC to operate the software. Use standard type USB mini connection cable to connect to ASDA-Soft.
Communication port connector (CN3/CN6) Power input of the main circuit (RST) Control circuit (L 1C L 2C ) I/O connector (CN1) Brake resistor connector (P D C) + STO (CN10) Encoder connector (CN2) resistor (optional purchase) Servo drive output (UVW) Regenerative 3-3