ASDA-B3 CANopen Mode Object 6041h: Statusword 11 Object function: The control command contains many functions, such as Servo on, command triggering, fault reset, and emergency stop. The state machine architecture is as follows: Bit Bit 0 - Bit 6: current status of the servo drive. Note: 0 indicates the bit is off; 1 indicates the bit is on; - indicates the bit is invalid. 11-53 Index 6041h Name Statusword Object code VAR Data type UNSIGNED16 Access RO PDO mapping Yes Setting range UNSIGNED16 Corresponding servo parameter N/A Default 0 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 Bit Function Description Bit 0 Ready to switch on Bit 0 - Bit 6:
current status of the servo drive (see the following table for details). Bit 1 Switch on Bit 2 Operation enabled Bit 3 Fault Bit 4 Voltage enabled Bit 5 Quick stop Bit 6 Switch on disabled Bit 7 Warning Warning output, but the servo remains with the servo on signal. Bit 8 - - Bit 9 Remote - Bit 10 Target reached - Bit 11 - - Bit 12 - Bit 13 - Individually defined according to the control mode. Bit 14 Positive limit - Bit 15 Negative limit - Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Description 0 - - 0 0 0 0 Not ready to switch on. 1 - - 0 0 0 0 Switch on disabled. 0 1 - 0 0 0 1 Ready to switch on. 0 1 - 0 0 1 1 Switch on. 0 1 - 0 1 1 1 Operation enabled (servo on).
0 0 - 0 1 1 1 Quick stop active. 0 - - 1 1 1 1 Fault reaction active. 0 - - 1 0 0 0 Servo fault (servo off).