Delta Electronics — 11.4.3.3 OD 6XXXh communication object group

CANopen Mode ASDA-B3 Bit 12 and Bit 13: current status of the servo drive. 11 Object 605Bh: Shutdown option code Object function: Set to 0: when servo off, the dynamic brake has no effect, so the motor runs freely and the mechanism stops only by the frictional force. Set to 1: when servo off, the servo stops with the operation of the dynamic brake. Object 6060h: Modes of operation Object function: This object sets the mode for operation.

11-54 Bit Operation mode definition Profile Homing Mode Interpolated Profile Velocity Profile Torque Position Mode Position Mode Mode Mode Bit 12 Set-point acknowledge Homing is complete Interpolation mode in motion Zero speed - Bit 13 Following error Homing error - - - Index 605Bh Name Shutdown option code Object code VAR Data type INTEGER16 Access RW PDO mapping Yes Setting range INTEGER16 Corresponding servo parameter N/A Default 0 Index 6060h Name Modes of operation Object code VAR Data type INTEGER8 Access RW PDO mapping Yes Setting range INTEGER8 Default 0 Setting value Mode 0 Reserved 1 Profile Position Mode 3 Profile Velocity Mode 4 Profile Torque Mode 6 Homing Mode 7 Interpolated Position Mode