ASDA-B3 Troubleshooting Motion control type (continued) 12 Note: if the servo drive shows an alarm that is not in this table, contact the local distributor or technician. STO type Note: if the servo drive shows an alarm that is not in this table, contact the local distributor or technician.
12-5 Error type Servo state Display Alarm name ALM WARN ON OFF PR number exceeds the range ○ Software positive limit ○ ○ Software negative limit ○ ○ Position counter overflows ○ ○ Position offset alarm for DO.MC OK _ ○ ○ Communication type absolute position command error ○ Indexing coordinate setting error ○ Value of PR special filter setting is too high ○ System failure ○ PR motion setting error or command decoding error ○ Error type Servo state Display Alarm name ALM WARN ON OFF AL500 STO function is enabled ○ ○ AL501 STO A lost (signal loss or signal error) _ ○ ○ AL502 STO B lost (signal loss or signal error) _ ○ ○ AL503 STO self-diagnostic error ○ ○