MAN Nutzfahrzeuge Aktiengesellschaft — Coolant temperature sensor

Test Coolant temperature sensor Flash code: 7x short Fault indication: Fault is indicated by the EDC indicator lamp coming on continuously Fault path: Coolant temperature sensor Effect of fault: The substitute value provided in the control unit for such cases results in a reduction in power output (e.g. in the event of radiator contamination or failure of cooling system). Possible cause: Line break, short-circuit, temperature sensor faulty, control unit faulty, failure or contamination of cooling system Test precondition:

EDC control unit disconnected / connected Socket box connected 35 Test Measurement Corrective measures Sensor resistance (control unit disconnected) Measure resistance at the socket box across pin 53 and pin 13 Setpoints: 1.3–3.6 KΩ at 15–30°C 230–460 Ω at 75–80°C – Check lines – Check plug connections – Replace temperature sensor – If no fault found, replace control unit (disconnect the control unit only when the current is swi t ch ed off) Sensor voltage (control unit connected) Measure voltage at socket box between pin 53 and pin 13 Setpoint: 3.46–1.22 V at 30–90°C