MAN Nutzfahrzeuge Aktiengesellschaft — Resistor bank

Test Resistor bank Driving speed Flash code: 8x short Fault indication: Fault is not indicated by the EDC indicator lamp Torque limitation Flash code: 1x long, 12x short Fault indication: Fault is indicated by the EDC indicator lamp coming on continuously Driving speed / Torque limitation Fault path: Resistance for the sensors not present – speed of travel (pin 51) and torque limit (pin 35) Resistor bank defective, Resistance values incorrect Effect of fault: Reduced final engine speed Possible cause: Line break, short-circuit, resistor bank defective Test precondition:

EDC control unit disconnected Socket box connected 36 Test Measurement Corrective measures Resistor bank Measure resistance across Setpoint: Pin 13 and Pin 35 500–520 Ω Pin 13 and Pin 51 2.8–3.2 kΩ – Check lines – Check plug connections – If no fault found, replace resistor bank