MAN Nutzfahrzeuge Aktiengesellschaft — Auxiliary rpm sensor

Test Auxiliary rpm sensor Flash code: 14x short Fault indication: Fault is indicated by the EDC indicator lamp coming on continuously Fault path: Auxiliary rpm sensor Statically implausible Dynamically implausible Implausible with rpm sensor Effect of fault: If the rpm sensor also fails, the engine will be shut down Possible cause: Line break, short to ground, auxiliary rpm sensor faulty, control unit faulty Test precondition: Disconnect EDC control unit to ensure the engine cannot start up Socket box connected U > 2 V 38 Test Measurement Corrective measures Resistance Measure the resistance at the socket box between pin 22 and pin 17 Setpoint:

800–1000 Ω – Check lines – Check plug connections – If no fault found, replace auxili- ary rpm sensor Engine speed signal Check signal at socket box at starting speed across pin 22 (+) and pin 17 (–) with oscilloscope Setpoint: see diagram