Test Engine overspeed Flash code: 1x long, 7x short Fault indication: Fault is indicated by the EDC indicator lamp coming on continuously Fault path: Engine overspeed Effect of fault: Fuel delivery is interrupted. EHAB is deactivated. If no other fault is present, fuel delivery will continue once the engine over- speed range has been left. Possible cause: Stiff control rod.
Injection pump defective, control unit defective, wiring har- ness defective, engine being towed 42 Test Measurement Corrective measures If no other faults are present, no further action is necessary – Deleting the fault memory Injection pump If the fault occurs more frequently, check injection pump, control unit and lines. – Replace lines – Replace control unit (disconnect control only when current is switched off) – Replace injection pump