Rating data sheet 8. Resistance to motor vehicle-specific liquids / fluids The control unit is resistant to diesel fuel, petrol, engine oil, engine cleaner, brake fluid, battery acid, windscreen washer fluid, isooctane / toluene 9.
Mechanical test data 9.1 Vibration stress As Point 5.1 9.2 Shock stress As Point 5.2 9.3 Alternating temperature Test Nb in accordance with DIN 40046 Part 14 Clause 3 (IEC 68-2-14 Nb) Lower test temperature ° C Upper test temperature +85 ° C Number of cycles 100 Temperature change rate Holding time at upper stress temperature 15 minutes each 9.4 Moisture resistance 9.4.1 Test in accordance with DIN standard Test Db in accordance with FW 24 DIN 50016 (IEC 68-2-30) Number of cycles 28 Function test after 7 cycles 9.4.2 Active moisture-alternating temperature test Rel. humidity 95% Normal temperature phase at 40 ° C Duration 240 h Low temperature phase at ° C Duration 2 h Changeover time 10.
Service life test The service life test comprises a mechanical test in accordance with Points 5.1 and 5.2 as well as a climatic test in accordance with Points 9.3 and 9.4. Function measurements in accordance with the test and adjustment specifications are conducted after the individual tests. 62