John Deere 230LCR, 230LCRD — CHAPTER 7

TM 5-3805-280-10 AIR COMPRESSOR - OPERATING INSTRUCTIONS CONTROL PANEL 5. Air Filter Service Indicators - Indicates when air filter elements need to be replaced. 6. Heater Switch - Flip “ON” in cold weather to activate control system heaters. 7. Heater Indicator - Indicates heaters are “ON” when lighted. 8. Compressor Discharge Pressure Gauge - Indicates pressure in receiver tank, psi (kPa). 9. Hourmeter - Records running time for maintenance. CONTROLS 10. Panel Light (PL1) - When illuminated, indicates power is on. When not illuminated, indicates power is off. 11. Panel Light (PL2) - When illuminated along with PL1, indicates unit is ready to start.

When not illuminated, but PL1 is, indicates compressor is operating at full pressure. 12. Toggle Switch (SW1) - Flip “ON” to activate systems prior to starting. Flip “OFF” to stop engine. 13. Toggle Switch (SW2) - DIAGNOSTICS/AUTO SHUTDOWN Flip “ON” to activate systems prior to starting. Flip “OFF” after warmup to provide full air pressure. 1. High Compressor Temperature - 2. Low Engine Oil Pressure - 12 psi or less 248 ° F (120 ° C) or more. 14. Start Button - 3. High Engine Temperature - Push to start engine. Coolant above 220 ° F (104 ° C). 15. Ether Inject Button - 4. Low Coolant Level - Push to inject metered amount of ETHER to help start engine in cold weather. USE SPARINGLY.

Must add coolant. Note: Items 6, 7 and 10-15 are also remote mounted in the excavator cab. 7-32 + 5 7 5 + COMPRESSOR ENGINE AIR FILTER 6 AIR FILTER HIGH COMPRESSOR 1 TEMPERATURE 8 LOW ENGINE 2 OIL PRESSURE DISCHARGE AIR PRESSURE HIGH ENGINE 3 TEMPERATURE 9 LOW COOLANT 4 HOURMETER LEVEL LAMP TEST - WITH ENGINE OFF, TURN POWER SWITCH TO •OFF", THEN TO •ON". ALL LAMPS SHOULD LIGHT. 10 12 14 + + + PL1 SW1 START 11 13 15 + + + PL2 SW2 ETHER INJECT 43208859