John Deere 230LCR, 230LCRD — CHAPTER 16

TM 5-3805-280-10 Maintenance—Every 1000 Hours 3. Turn flywheel until timing pin goes into hole in flywheel. 4. Using engine rotation tool, rotate engine flywheel in running direction (clockwise viewed from front) until No. 1 cylinder is at Compression stroke. If No. 1 cylinder rocker arms are loose, the engine is at No. 1 Compression. If No. 1 cylinder rocker arms are not loose, rotate engine one full revolution (360 ° ) to No. 1 Compression RG7409 –UN–06AUG96 To change piston position, remove timing pin and rotate flywheel. 5. Check and adjust valve clearance to specifications as directed in the following procedures. 6. Loosen jam nut (A) and adjust clearance with a screwdriver, as shown.

TX,86,DH5104 –19–09JUL96–2/2 16-4