John Deere 230LCR, 230LCRD — APPENDIX A

TM 5-3805-280-10 OPERATOR PREVENTIVE MAINTENANCE CHECKS AND SERVICES FOR HYDRAULIC EXCAVATOR 230LCR/230LCRD A-23 ITEM NO. INTERVAL ITEM TO BE INSPECTED PROCEDURE: DO THE PMCS AND HAVE ITEM REPAIRED, FILLED, OR ADJUSTED AS NEEDED EQUIPMENT IS NOT READY/AVAILABLE IF: 53 54 Monthly Monthly Check Swing Gearbox Oil Level (1) Park machine on level surface. (2) Remove dipstick (A). Oil must be in the operating range. (3) If oil is needed, remove filler cap (B) and add oil (see Fuels and Lubricants, Chapter 9). (4) Recheck oil level. Drain Hydraulic Tank Sump WARNING: High-pressure release of oil from pressurized system can cause serious burns or penetrating injury.

The hydraulic tank is pressurized. Do not remove plug (A). Release pressure by loosening vent plug. (1) Loosen vent plug (A) to release hydraulic pressure. Oil is below the ADD or SAFE mark on the dipsti