Komatsu — eebm001902 a3.pdf

STRUCTURE AND FUNCTION OVERLOAD WARNING DEVICE OVERLOAD WARNING DEVICE 1) OUTLINE Function This device is installed to prevent the machine from tipping over when it lifts an excessive weight while being used as a crane. A Structure When an excessive weight is lifted, the oil pres- sure goes up at the bottom side of the boom cylinders. When this happens the pressure switch senses the rising pressure and when the pressure exceeds the safe limit value the pres- sure switch is activated. This causes a warning buzzer to sound inside the cab and the over- load monitor lamp to flash on and off.

Immedi- ately these warnings are activated, the operator must either lower the work equipment to the ground or bring the work equipment arm closer to the machine to prevent the machine tipping over. 10-123