Komatsu — eebm001902 a3.pdf

TESTING AND ADJUSTING CONTROL CIRCUIT OIL PRESSURE TESTING AND ADJUSTING CONTROL CIRCUIT OIL PRESSURE 1. Measuring # Oil temperature when measuring: 45 – 55°C Lower the work equipment to the ground and stop the engine. Loosen the oil filler cap slowly to release the pressure inside the hydraulic tank. Then set the safety lock lever to the LOCK position. a. Install oil pressure gauge C1 (5.8 Mpa (60 kg/ cm 2 ) to quick disconnect nipple. b. Start the engine and measure with the engine at full throttle. 20-41