Komatsu — eebm001902 a3.pdf

TESTING AND ADJUSTING SOLENOID VALVE OUPUT PRESURE TESTING SOLENOID VALVE OUT- PUT PRESSURE 1. Measuring # Oil temperature when measuring: 45 – 55°C a. Measuring output pressure of LS-EPC solenoid valve. i. Disconnect output hose (1) of the LS-EPC solenoid valve, then use adapter C3 in the oil pressure gauge kit tot install oil pressure gauge C1 (5.9 Mpa (60 kg/cm 2 )). ii. Measure the output pressure under the con- ditions in Table 1. Table 1 # Monitoring code 10 or 40 for engine speed Monitoring code 15 for LS control EPC current 2. Measuring output pressure of ON/OFF solenoid valve a.

Measuring output hose (2) of the solenoid valve, then use adapter C3 in the oil pressue gauge kit C1 (5.9 Mpa (60 kg/cm 2 )). b. Measure the output pressure under the conditions in Table 2. 20-42 Operation and working mode Engine speed (rpm) Output pressure (MPA (kg/ cm2) Current (A) [Refer- ence] All control levers at neutral Min. 1500 2.94 (30) 900 ± 30 H/O mode or G/O mode, travel circuit at neutral, any work equip- ment lever is operated Min. 1900 0 (0) 0