TROUBLESHOOTING C-MODE C-13 [E215] Disconnection in 2-stage relief solenoid system is displayed # This troubleshooting is carried out when there is still an abnormality, so when disconnecting the connector and inserting the T-adapter, or when removing the T-adapter and returning the connector to its original position, if an E service code is not displayed, the problem has been removed. # If the starting switch is turned OFF after an abnormality occurs, turn the starting switch ON and check if an E service is displayed. (If it is not displayed, the problem has been removed). # Before carrying out troubleshooting, check that all related connectors are properly inserted.
# Always connect any disconnected connectors before going on the next step. C-13 Related electric circuit diagram АШ6 (KESI) 20-185