Komatsu — eebm001902 a3.pdf

TROUBLESHOOTING M-CODE TROUBLESHOOTING OF MACHINE MONITOR SYSTEM (M CODE ) ACTION TAKEN BY MONITOR PANEL WHEN ABNORMALITY OCCURS AND PROBLEMS ON MACHINE 20-240 User code Service code Abnormal system Nature of abnormality - E101 Abnormality in error data 1. Abnormality in internal memory 2. Excess voltage (more than 36V) has occurred 3. Low voltage (less than 12V) has occurred 4. Connector has separated - E102 Abnormality in clock data 1. Abnormality in internal clock function 2. Excess voltage (more than 36V) has occurred 3. Low voltage (less than 12V) has occurred 4. Connector has separated - E103 Short circuit in buzzer output sys- tem 1. Short circuit inside buzzer 2.

Power line in contact with wiring harness between monitor (P01 (7) pin) and buzzer 3. Abnormality in monitor panel - E104 Air cleaner clogging detected is displayed 1. Air cleaner clogging sensor has detected clogging - E108 Engine water tem- perature 105°C detected is displayed 1. Coolant temperature gauge has detected water temperature of 105°C - E112 Short circuit in wiper motor drive normal rotation system 1. Short circuit with ground, short circuit inside wiper motor 2. Short circuit with ground, short circuit inside relay box 3.

Short circuit with ground, short circuit in wiring harness between monitor P02 (11) and relay box W08 (2), or between W08 (6) and wiper motor W04 (3) - E113 Short circuit in wiper motor drive reverse rotation system 1. Short circuit with ground, short circuit inside wiper motor 2. Short circuit with ground, short circuit inside relay box 3. Short circuit with ground, short circuit in wiring harness between monitor P02 (3) and relay box W08 (3), or between W08 (7) and wiper motor W04 (1) - E114 Short circuit in window washer drive system. 1. Short circuit inside washer monitor 2. Short circuit inside relay box 3.

Short circuit with power source in wiring harness between monitor P02 (2) and relay box WO8 (17), or between WO8 (16) and M28 (1)