Komatsu — eebm001902 a3.pdf

TROUBLESHOOTING M-CODE b) (engine oil level) flashes # Chek that the engine oil is at the specified level before carrying out troubleshooting. Table M-8 b) Related electric circuit diagram Engine throttle, pump controller Engine oil level sensor P05 (X1) 16 20-252 YES 1 Does display go out 3 YES when P05 (female) (1) is connected to Is bit (4) of chassis ground? YES monitoring code 24 2 lighted up? • Disconnect P05. • Turn starting switch Is continuity between ON. C16 (female) (16) • Turn starting NO and chassis as NO switch ON. shown in table? • Set to monitoring • Turn starting code 24. switch OFF. NO • Disconnect C16,P05. * Connectdisconnect short connector to P05 (female) (1).

Cause Remedy Defective engine oil level sensor system (see M-27) Defective engine throttle - pump controller Defective monitor panel Defective contact, or disconnection in wiring harness between C16 (female) (16) - E08 (5) - P05 (female) (1) - Replace Replace Repair or replace Chassis ground Continuity Connected Yes Disconnected No Engine oil level