TROUBLESHOOTING M-CODE M-9 Preheating is not being used but (preheating monitor) lights up # Before carrying out troubleshooting, check that all the related connectors are properly inserted. # Always connect any disconnected connectors before going on the next step. M-9 Related electric circuit diagram Electrical intake air heater 20-253 2 YES Is voltage between YES P01 (18) and chassis 1 normal? Is voltage between starting switch • Turn starting switch NO terminal R1 and ON. chassis normal? • Max. 1V • Disconnect terminal R1. NO • Turn starting switch ON. • Max.
1V Cause Remedy Defective monitor panel Short circuit with power source in wiring harness between starting switch R1 - X07 (3) - H13 (6) - P01 (female) (18) Defective starting switch Replace Repair or replace Replace