Komatsu — eebm001902 a3.pdf

DISASSEMBLY AND ASSEMBLY MAIN PUMP Installation Carry out installation in the reverse order to removal. 1 Involute spline of main pump: Anti-friction com- pound (LM-G) Mating surface of main pump case: Gasket seal- ant (LG-6) Refilling with oil (damper) # Add engine oil through the oil filler to the specified level. Run the engine to circulate the oil through the system. Wait for at least 15 minutes, then check the oil level again. Damper: Approximately 0.7 l. Refilling with oil (hydraulic tank) # Add oil through the oil filler to the specified level. Run the engine to circulate the oil through the system. Then check the oil level again. Bleeding air # Bleed the air.

For details, see TESTING AND AD- JUSTING, Bleeding air. 30-87