DISASSEMBLY AND ASSEMBLY MAIN PUMP INPUT SHAFT OIL SEAL MAIN PUMP INPUT SHAFT OIL SEAL Removal 1. Remove main pump assembly. For details, see MAIN PUMP, Removal. 2. Remove snap ring (1), then remove spacer (2). 3. Lever up oil seal (3) with a screwdriver to remove. # When removing the oil seal, be extremely careful not to damage the shaft. 1 Installation Carry out installation in the reverse order to removal. Lip of seal: Grease (G2-L1) Coat the outside circumference of the oil seal with grease (G2-L1) thinly, then press fit. # Using tool N , press fit oil seal (3). 1 30-88