DISASSEMBLY AND ASSEMBLY PUMP MERGE-DIVIDER VALVE PUMP MERGE-DIVIDER VALVE Disassembly 1. Remove plug (2) from valve body (1), then remove spring (3) and spool (4). 2. Remove plate (5). 3. Remove plug (6), then remove spring (7) and spool (8). 4. Remove plug (9). # After disassembling, if there is any abnormality in body (1) or spools (4) or (8), replace the whole pump merge-divider valve assembly. Assembly Before assembling, coat the sliding surface with en- gine oil. 1. Fit O-ring to plug (9) and install to valve body (1). Plug (9): 39.2 ± 5.88 Nm (4.0 ± 0.6 kgm) 2. Assemble spool (8) and spring (7), then fit O-ring to plug (6) and install. Plug (6): 39.2 ± 5.88 Nm (4.0 ± 0.6 kgm) 3.
Fit O-ring to plate (5) and install to valve body. 4. Assemble spool (4) and spring (3), then fit O-ring to plug (2) and install. Plug (2): 151.9 ± 24.5 Nm (15.5 ± 2.5 kgm) 30-98