CLSS STRUCTURE AND FUNCTION Boom LOWER modulation (ACTIVE MODE) 1. Spool 2. Piston 3. Spring 4. Plug St0 : Spool stroke St2 : Piston stroke Operation 1. When active mode is switched OFF (SOLE- NOID IS ON) a. The pilot pressure passes through port A and acts on the right end of piston (2), so piston (2) is pushed to the left. When this happens, the maximum stroke of spool (1) becomes St0 . Function In the active mode, the maximum stroke of the boom LOWER spool is increased and the flow of oil through the spool is increased, so the boom LOWER speed increases and it becomes possible to carry out work speedily. To tank 2. When active mode is switched ON (SOLENOID IS OFF) a.
Port A is connected to the drain, and the right end of piston (2) becomes the drain pressure, so the force of spring (3) acts on piston (2), and moves it to the right. It stops when it contacts plug (4). b. When this happens, the maximum stroke of spool (1) becomes greater by the amount ( St1 ) that piston (2) moves, so the amount of oil flowing through is increased. 10-71