Komatsu — eebm001902 a3.pdf

STRUCTURE AND FUNCTION CLSS Arm IN modulation (with travel) 1. Spool 2. Piston St0 : Spool stroke Operation 1. When travel is not operated a. When the arm IN is operated, spool (1) moves to the right by stoke St0 until it con- tacts piston (2). Function If the arm IN is operated when travelling up a steep slope, the arm stroke is restricted in order to control the flow of oil to the arm cylinder so that the pump pressure does not drop. When this happens, the pump merge/divider valve is in the divide condition, so the oil from the pump passes through the travel junction valve and is supplied to the left travel motor. St1 : Spool stroke St2 : Piston stroke b.

When the arm IN is operated, spool (1) moves to the right, but the maximum spool stroke ( St1 ) is restricted by the amount ( St2 ) that piston (2) moves. 2. When travel is operated a. The travel PPC pressure passes through port A and acts on the right end of piston (2) to push piston (2) to the left. 3. Note: Arm out, bucket curl and bucket dump are also modulated with travel. 10-72