Komatsu — WHEN REQUIRED

. MAINTENANCE MAINTENANCE PROCEDURE MAINTENANCE MAINTENANCE PROCEDURE NOTICE 4 - 22 When inserting the eleme nt, if the rubber at the tip i s swollen or the outer element is not pushed in straight, and cove r (3) is assembled by force to hook (2), there is dange r that the hook a be damaged, so be careful w hen assembling. 12. I nsta ll cover (3) as 1) A lign cover (3) with the elemen 2) H ook the tip o f hook (2) t o th leaner body a nd lock it in position lways install he ground (A). 4) W hen cover ( 3) is installed, check that the clearance etween the ai r cleaner body a nd cove r (3) is not too large. it is too large