D-6: INSTALLING BOOM CYLINDER HOSES Precautions 1) Parts sent individually transportation in a safe place so that they can be Keep the flanges, O-rings, and heads used during 2) used again. When connecting the hoses, be careful not to get the ) O-rings caught. 3) Install the hoses without twisting or interference. 1. inder hoses. Remove the short circuit for flushing the boom cyl- 2. inder end. Remove the blind plugs in the tube at the boom cyl- 3. 07099-01216 x 2) to the standard circuit as shown Install the boom cylinder hoses (07099-01416 x 2, in the diagram below, then replace the O-rings mount with new parts sent individually. (~07000-13048 x 2, 07000-13038 x 2) at the hose 4. way.
Install the left and right cylinder hoses in the same