Detroit Diesel — Print Preview - C:\Temp\APTCACHE\6SE412A\6SE412A Detroit Diesel

1.17 PISTON, PISTON RING, AND CONNECTING ROD 1. Position the connecting rod in the piston so that the longer end side is on the unit pump side (left side), and the arrow on the crown of the piston points toward the front of the engine. 2. Install the wrist pin in the piston. See Figure 1-83. 1. Piston 2. Wrist Pin Figure 1-83 Installing the Wrist Pin [a] Lubricate the wrist pin with a light coating of clean engine oil. [b] Insert the wrist pin into the wrist pin bore. [c] Secure the wrist pin with the two snap rings. All information subject to change without notice. 1-110 6SE412 0403 Copyright © 2004 DETROIT DIESEL CORPORATION