Detroit Diesel — Print Preview - C:\Temp\APTCACHE\6SE412A\6SE412A Detroit Diesel

1.19 VALVES Valve seat diameter at the contact surface of the cylinder head (B) Valve head diameter (C) Valve seat height (D) Valve seat width at the valve head (E) Valve seat angle (F) Valve length (G) Figure 1-122 Critical Dimensions, Valve Stem and Head Table 1-42 Valve Removal/Installation Specifications in mm (inches) 13. Check the condition of the valve seat insert. Repair the valves if necessary. All information subject to change without notice.

1-158 6SE412 0403 Copyright © 2004 DETROIT DIESEL CORPORATION Description Intake Exhaust Valve Stem Diameter (A) 8.935-8.950 (0.3518-0.3524) 8.925-8.940 (0.3514-0.3520) Valve Seat Diameter, at Head Contact Surface (B) 42.0 (1.65) 39.0 (1.54) Valve Head Diameter (C) 45.4-45.6 (1.79-1.80) 40.9-41.3 (1.61-1.63) Valve Seat Height-New (D) 3.1-3.3 (0.12-0.13) 2.8-3.1 (0.11-0.12) Minimum Valve Seat Height-After Grinding (D) 2.9 (0.11) 2.3 (0.09) Valve Seat Width, at Valve Head (E) 3.5-4.5 (0.14-0.18) 3.5-4.5 (0.14-0.18) Valve Seat Angle (F) 30 degrees 45 degrees Valve Length (G) 145.0 (5.71) 145.0 (5.71)