Detroit Diesel — Print Preview - C:\Temp\APTCACHE\6SE412A\6SE412A Detroit Diesel

MBE 4000 SERVICE MANUAL [a] Attach the adaptor to the torque wrench drive. [b] The amount of torque you need to apply depends on the length of your torque wrench.Examples: For a 12-inch torque wrench, tighten 27 N·m (20 lb·ft). For a 24-inch torque wrench, tighten 25 N·m (18 lb·ft). 4. Install the cylinder head cover(s), as removed. Refer to section 1.1.2. 5. Prime the fuel system. Refer to section 2.1.2. PERSONAL INJURY Diesel engine exhaust and some of its constituents are known to the State of California to cause cancer, birth defects, and other reproductive harm. Always start and operate an engine in a well ventilated area.

If operating an engine in an enclosed area, vent the exhaust to the outside. Do not modify or tamper with the exhaust system or emission control system. 6. Run the engine and check for leaks. Tighten the connections as needed. 7. Shut down the engine and install the engine trim cover. All information subject to change without notice. 6SE412 0403 Copyright © 2004 DETROIT DIESEL CORPORATION 2-17