MBE 4000 SERVICE MANUAL 4. Remove the injector line. See Figure 2-10. Refer to section 2.3.1. 1. Retaining Bolt 6. Constant-Throttle End Cover 2. Tensioning Arm 7. O-ring (transfer tube) 3. Nozzle 8. Transfer Tube 4. O-ring 9. Thrust Bolt 5. Seal Ring 10. Injector Line Figure 2-10 Fuel Injection System (exploded view) 5. Remove the thrust bolt and the transfer tube. Discard the old O-ring. 6. Remove the tensioning arm. All information subject to change without notice. 6SE412 0403 Copyright © 2004 DETROIT DIESEL CORPORATION 2-19