Detroit Diesel — Print Preview - C:\Temp\APTCACHE\6SE412A\6SE412A Detroit Diesel

2.4 FUEL INJECTOR NOZZLE 4. Install the nozzle in the cylinder head. See Figure 2-13. 1. Injector Line Fitting 6. O-ring (nozzle) 2. Thrust Bolt 7. Retaining Bolt 3. O-ring (transfer tube) 8. Tensioning Arm 4. Transfer Tube 9. End Cover (Constant-Throttle) 5. Nozzle 10. Seal Ring Figure 2-13 Positioning the Nozzle 5. Install the retaining bolt in the tensioning arm. Tighten the bolt 50 N·m (37 lb·ft). NOTE: The tensioning arm insures the correct positioning of the nozzle. All information subject to change without notice. 2-22 6SE412 0403 Copyright © 2004 DETROIT DIESEL CORPORATION