7.4 EGR COOLER AND COOLER SUPPORT BRACKET 7. Remove the two front sheet metal support-to-cooler support bolts (See number 1 in graphic). See Figure 7-20. 1. Front Sheet Metal Support-to-Cooler Support Bolts 3. EGR Cooler-to-Sheet Metal Support bolts 2. Front Sheet Metal Support Figure 7-20 Removing Front Sheet Metal Support NOTE: Do not remove the eight mounting bolts attaching the reed valve housing to the cooler at this time. Also, do not remove the two EGR cooler-to-sheet metal support bolts at this time. They will all be removed once the EGR cooler as an assembly is taken off of the engine. All information subject to change without notice.
7-28 6SE412 0403 Copyright © 2004 DETROIT DIESEL CORPORATION