7.4 EGR COOLER AND COOLER SUPPORT BRACKET 12. Loosen and remove the four bolts from the four tightening clamps that are holding the EGR cooler to the cooler support bracket. Remove the four tightening tools for clamps also. See Figure 7-22. 1. EGR Cooler 3. Clamps (4 Qty.) 2. Tightening Tool for Clamps 4. Clamp Bolts Figure 7-22 Removing Tightening Clamps on the Cooler NOTE: The oil filter and oil filter cover should be removed for good clearance when removing and installing the EGR cooler assembly. All information subject to change without notice. 7-30 6SE412 0403 Copyright © 2004 DETROIT DIESEL CORPORATION