Detroit Diesel — Print Preview - C:\Temp\APTCACHE\6SE412A\6SE412A Detroit Diesel

8.1 DRIVE BELTS 8.1.6 Air Conditioner Compressor Belt Installation Install the A/C compressor belt as follows: 1. Fit the A/C compressor drive belt on the belt pulleys. Be careful not to kink, stretch, or otherwise damage the belt. For correct routing, see Figure 8-7. Do not fit the belt onto the tensioner pulley yet. 1. Tensioner Pulley 3. Crankshaft Pulley 2. A/C Compressor Pulley Figure 8-7 Air Conditioner Compressor Belt Routing 2. Release the tension on the A/C compressor belt. See Figure 8-1. 3. Make sure the belt is correctly positioned for the tensioner pulley. 4. Restore the tension on the belt. [a] Lower the socket wrench to return the tensioner pulley to its original position.

[b] Remove the socket-wrench bit from the pulley bolt. 5. Check the A/C compressor belt to make sure it is in the correct position and properly aligned on the pulleys. 6. Connect the batteries. All information subject to change without notice. 8-10 6SE412 0403 Copyright © 2004 DETROIT DIESEL CORPORATION