Detroit Diesel — Print Preview - C:\Temp\APTCACHE\6SE412A\6SE412A Detroit Diesel

MBE 4000 SERVICE MANUAL 8.1.7 Belt Tensioner Removal Remove the belt tensioner as follows: NOTE: This procedure works for all belt tensioners. See Figure 8-8 to identify the correct belt tensioner. 1. Main Drive Belt Tensioner 4. Mounting Pad 2. Fan Belt Tensioner 5. Socket-Head Mounting Bolt 3. A/C Compressor Belt Tensioner Figure 8-8 Belt Tensioners PERSONAL INJURY To avoid injury to hands and fingers from the spring-loaded auto belt tensioner violently snapping back, do not cut the belt to remove it. 1. Release the tension on the main drive belt (alternator and coolant pump), fan belt, and/or A/C compressor belt, as desired. Refer to section 8.1.1. 2. Release the tensioning pulley. 3.

Remove the mounting bolt that fastens the belt tensioner and tensioner pulley to the cylinder block. All information subject to change without notice. 6SE412 0403 Copyright © 2004 DETROIT DIESEL CORPORATION 8-11