Detroit Diesel — Print Preview - C:\Temp\APTCACHE\6SE412A\6SE412A Detroit Diesel

14.1 PREPARING ENGINE FOR STORAGE NOTICE: Clean at moderate pressures only; otherwise the fins of the radiator grille could be damaged. EYE INJURY To avoid injury from flying debris when using compressed air, wear adequate eye protection (face shield or safety goggles) and do not exceed 40 psi (276 kPa) air pressure. 1. Remove debris (dust, insects, etc.) from the fins of the radiator grille by blowing them through with compressed air or spraying them out with water. Work from the rear of the radiator (in the opposite direction of the normal cooling air flow). 2. Drain the coolant when the engine is cold. For detailed procedures, see the vehicle/chassis maintenance manual.

For types of coolant, 3. If the HVAC unit is connected to the cooling system, open the regulating valves all the way. 14.1.3 Degreasing the Cooling System Degrease the cooling system as follows: 1. Fill the cooling system with a 5% solution (1.6 ounces per quart of water—50 grams per liter) of a mildly alkaline cleaning agent, such as sodium carbonate. All information subject to change without notice. 14-4 6SE412 0403 Copyright © 2004 DETROIT DIESEL CORPORATION