Detroit Diesel — Print Preview - C:\Temp\APTCACHE\6SE412A\6SE412A Detroit Diesel

MBE 4000 SERVICE MANUAL NOTICE: Head and gasket must be seated properly, or engine damage could result. 3. Using a dial caliper, measure the length of the cylinder head bolts from the end of the bolt to the bottom of the flange. See Figure 1-6. Listed in Table 1-3 are the acceptable lengths. Replace any bolts which do not meet these specifications. 1. Dial Caliper 3. Bottom of Flange 2. End of Cylinder Head Bolt Figure 1-6 Measuring Head Bolts Table 1-3 Cylinder Head Bolt Lengths 4. Lubricate the cylinder head bolts with engine oil. All information subject to change without notice.

6SE412 0403 Copyright © 2004 DETROIT DIESEL CORPORATION 1-11 Description Length Shaft length when new 210.0 mm (8.27 inches) Maximum shaft length 212.0 mm (8.35 inches)