Freightliner — Century Class Maintenance Manual

Engine Cooling/Radiator 20 1 2 3 f500244 06/08/95 1. Low-Coolant-Level Sensor 2. SAE Cap (for coolant overflow pressure relief only) 3. Fill Cap Fig. 1, Surge Tank, Century Class Conventional 2 3 cooling system prior to the system cooling could cause severe personal injury due to scalding. 5. Remove the drain plugs from the radiator side tank, the lower tank on auxiliary radiators, and at the lower radiator outlet pipe elbow, if equipped. See Fig. 4 . Allow the coolant to drain. 1 6. Install and tighten the drain plug(s) and the ra- diator outlet pipe drain plug after the radiator has been drained. Do not overtighten the plugs. 7. Flush the radiator(s) as follows.

7.1 Disconnect the radiator upper and lower hoses. 07/21/98 f200465 7.2 Attach the flushing gun nozzle to the ra- diator at the lower radiator hose opening. Run the water until the radiator is full. 1. Radiator/Charge Air Cooler Assembly 2. Fill Cap 3. Surge Tank Fig. 2, Surge Tank, Argosy COE NOTICE WARNING When flushing the radiator, do not apply more than 15 psi (100 kPa) air pressure. Excessive pres- sure can damage the radiator. Do not attempt to drain the cooling system until the coolant and engine are cool. Draining the Century Class Trucks Maintenance Manual, January 2016 20/2