daewoo — Daewoo Wheel Loader Shop Manual

Power Take-off Shaft Assembly 1. Install both snap rings into the groove in the lower housing bore. See Figures 4-247 FIGURE 4-247 4686 FIGURE 4-250 4688 and 4-92. 2. Use a ring expander to install the ball bearing into the housing bore until the upper snap ring FIGURE 4-248 4687 FIGURE 4-251 4689 FIGURE 4-249 4685 is engaged in the groove in the ball bearing. See Figures 4-248 and 4-249. FIGURE 4-252 4690 4-64 TORQUE CONVERTER AND TRANSMISSION Mega 300-III Shop Manual