daewoo — Daewoo Wheel Loader Shop Manual

6. Insert the cover plate into the transmission and set it over the planetary carrier. See Figure 4-388. 9. Insert the lower snap ring into the hollow drive shaft. See Figure 4-391. Insert the needle bearing until it bottoms on the lower snap ring. Install the upper snap ring on top of the bearing. FIGURE 4-388 4826 7. Apply Loctite to the cover plate bolts. Bolt the cover plate to the output gear. See Figure 4-389. FIGURE 4-391 4829 10. Insert the hollow drive shaft into the transmis- sion. See Figure 4-392. FIGURE 4-389 4827 8. Insert the full circle oil baffle into the transmis- sion. See Figure 4-390. FIGURE 4-392 4830 11. Apply Loctite to the bolts for the hollow drive shaft.

Bolt the hollow drive shaft to the output gear. See Figure 4-393. FIGURE 4-390 4828 FIGURE 4-393 4831 4-92 TORQUE CONVERTER AND TRANSMISSION Mega 300-III Shop Manual