12. Install the semicircular oil baffle. See Figure 4-394. Apply Loctite to the bolts for the oil baffles. Bolt the oil baffles together. Tighten the bolts to 49 Nm (36 ft lb). 15. Install the hollow output shaft in the bore. See Figure 4-397. FIGURE 4-397 4835 FIGURE 4-394 4832 16. Install 2 assembly studs on the mounting plate for the power disengagement gearbox. See Figure 4-398. Slide the gasket over the assembly studs and into place on the mount- ing plate. Slide the power disengagement gearbox into place over the studs. 13. Install the bearing over the hollow drive shaft. See Figure 4-395. Turn the transmission 180°. FIGURE 4-395 4833 14. Install the roller bearing in the bore.
See Figure 4-396. FIGURE 4-398 4836 FIGURE 4-396 4834 Mega 300-III Shop Manual TORQUE CONVERTER AND TRANSMISSION 4-93