daewoo — Daewoo Wheel Loader Shop Manual

9. Insert the cable harness and socket into the valve body. See Figure 4-482. Install the screws into the socket and tighten. 10. Thread 2 assembly studs into the bell hous- ing. See Figure 4-483. Slide the gasket for the clutch valve into position over the studs. Slide the valve into position over the studs. Insert the bolts into the valve and tighten to 10 Nm (8 ft lb). Remove the assembly studs. FIGURE 4-482 4920 FIGURE 4-483 4921 4-112 TORQUE CONVERTER AND TRANSMISSION Mega 300-III Shop Manual