daewoo — Daewoo Wheel Loader Shop Manual

10. Insert the assembly tool down into the bore of the steering unit. See Figure 5-41. FIGURE 5-43 4972 FIGURE 5-41 4970 13. The sleeve will push the O-ring and backup ring into the correct position. See Figure 5-44. 11. Use the assembly tool to install the O-ring and the backup ring into the bore. See Figure 5-42. FIGURE 5-44 4973 14. Bolt the housing back into the stabilizing base. See Figure 5-45. FIGURE 5-42 4971 12. Unbolt the housing from the stabilizing base. Hold the housing in a horizontal position. See Figure 5-43. Insert the sleeve and spool into the bore. FIGURE 5-45 4974 5-14 POWER STEERING MEGA 300-III Shop Manual