15. Insert the ball into the hole. See Figure 5-46. 17. Lubricate the O-ring with 20 weight mineral oil and install it in the groove. See Figure 5-48. FIGURE 5-46 4975 FIGURE 5-48 4977 16. Install the threaded bushing into the hole that the ball was placed into. See Figure 5-47. Lightly tighten the bushing. The top of the bushing must be lower than the surface of the housing. 18. Install the middle plate onto the housing. See Figure 5-49. Be sure to properly align the plate holes with the holes in the housing. FIGURE 5-49 4978 FIGURE 5-47 4976 19. Lubricate the O-ring with 20 weight mineral oil and install it in the groove. See Figure 5-50.
FIGURE 5-50 4979 MEGA 300-III Shop Manual POWER STEERING 5-15