daewoo — Daewoo Wheel Loader Shop Manual

25. Install the spacer bushing. See Figure 5-56. Remove the bolt that was installed in the previous step. 27. Install the end cover. See Figure 5-58. OSPL 630 – 3.8 mm (11) OSPL 800 – (24) OSPL 1000 – (24) FIGURE 5-58 4987 28. Install a washer and the roll pin into the hole shown in Figure 5-59. FIGURE 5-56 4985 26. Use a screwdriver to install the OSPL 800 and 1000 spacers. See Figure 5-57. FIGURE 5-59 4988 29. Install the 6 remaining bolts and tighten them. See Figure 5-60. Cross tighten the bolts and roll pin to 48.1 Nm (35 ft lb). FIGURE 5-57 4986 FIGURE 5-60 4989 MEGA 300-III Shop Manual POWER STEERING 5-17