daewoo — Daewoo Wheel Loader Shop Manual

7. Use a snap ring pliers to install the snap ring (12, Figure 7-43) on the shaft. 10. Install the shaft and bearing assembly into the body. See Figure 7-46. 12. Snap Ring FIGURE 7-46 4078 FIGURE 7-43 4075 11. Install the spiral retainer ring (15, Figure 7-47) over the shaft and onto the bearing. 8. Install the seal (13, Figure 7-44) into the body. The lip of the seal must face toward the bearing. 15. Retainer Ring 13. Seal FIGURE 7-47 4079 FIGURE 7-44 4076 12. Place the O-ring seal (16, Figure 7-48) into the body. 9. Insert the ring (14, Figure 7-45) into the body. 16. O-ring Seal 14. Ring FIGURE 7-48 4080 FIGURE 7-45 4077 Mega 300-III Shop Manual HYDRAULIC SYSTEM 7-13