ELECTRICAL SYSTEM Electrical Schematic Wiring Color Code for Electrical Schematic Diagrams A foldout schematic that displays the electrical cir- cuits for the entire machine is printed at the end of this section. See Figure 9-7. Color markings on the electrical schematic are abbreviated according to the following notation. 24 Volt Operation The electrical system operates at 24 volts. The engine charging and starting system and electrical lights, controls and accessories (with the single exception of the cab radio/cassette player) all require 24 volt compatibility. WARNING!!! 1. Do not attempt to replace 24 volt com- ponents with parts made for more widely available 12 volt systems.
The cigarette lighter, for example, can over- heat with a 12 volt element. 2. Disconnect the power source (the nega- tive side of the battery, first) before per- forming any type of service or mainte- nance on the electrical system or acces- sories. WR (White wire with red stripe) Wire base color – 1st position Wire stripe color – 2nd position IMPORTANT In the description for a wire that has a base color and a colored stripe, the base color is listed first. On the schematic, a wire marked WR is a White wire with a Red stripe. On the schematic, the numbers printed on wire lengths represent the area of the wire cross section in millimeters.
For example, a wire marked 0.85 means that the area of the wire cross section is 0.85 mm 2 (.0013 in 2 ). A wire marked 1.25 has a cross sectional area of 1.25 mm 2 (.0019 in 2 ). Mega 300-III Shop Manual ELECTRICAL SYSTEM 9-1 Letter Color W B R Y G White Black Red Yellow Green Letter Color L Gr Br Or Lg P V Light blue Grey Brown Orange Light green Pink Violet